End Cap Re-Gluing Information

In the unlikely event that the small black plastic end cap has come unglued from your dispenser, please send your unit in for warranty service or follow the easy instructions below.

1. Note 4 pieces of dispenser. If parts have come unassembled, follow #2-3 below. Otherwise, skip to #4.
   
2. Insert slider with larger end facing red nozzle
   
3. Insert smaller tube into outer tube. Rotate so that metal pin engages in outer tube thread.
   
4. Ensure 2 tubes fit together snugly. Metal pin should not be visible.
   
5. Use Superglue and coat upper portion of end cap. Only curved vertical surface that fits inside the inner tube needs glue.
   
6. Insert end cap into dispenser and press to fit. There should be no space between the tubes at the top or bottom of the dispenser.
   
7. Your dispenser is ready for use once glue hardens (a few hours).